النتائج 1 إلى 2 من 2

الموضوع: أنابيب ال RSC

  1. #1
    Junior Engineer
    تاريخ التسجيل
    May 2016
    الدولة
    السعودية
    المشاركات
    18

    أنابيب ال RSC

    السلام عليكم ورحمة الله

    كان عندي استفسار يا بشمهندسين بخصوص الأنابيب المستخدمة للتمديدات
    ماهي انابيب ال RSC واي الفرق بينها وبين ال EMT ؟؟

    شكرا جزيلا لتعاونكم الدائم

  2. #2
    Junior Engineer الصورة الرمزية elhusinyelhabyan
    تاريخ التسجيل
    Oct 2008
    الدولة
    egypt
    المشاركات
    276

    رد: أنابيب ال RSC

    Electrical ****llic Tubing (EMT)
    Another example of a rigid electrical conduit is EMT, which is most commonly made of galvanized steel but can be aluminum. EMT is also called "thin-wall" conduit because it is thin and lightweight, especially compared to RMC. EMT is rigid but can be bent with a simple tool called a conduit bender. EMT is installed with couplings and fittings that are secured with a setscrew or compression-type fastener. The tubing is not threaded like RMC is. Common sizes of EMT include 1/2-inch, 3/4-inch, and 1-inch.

    It is commonly used for exposed indoor wiring runs in residential and light commercial construction. It must be used with special watertight fittings to be used outdoors in exposed locations.

    [U]Rigid Steel Conduit is covered by Article 344 of NEC and a threadable raceway of circular cross section designed for the physical protection and routing of conductors and cables and for use as an equipment grounding conductor when installed with its integral or associated coupling and appropriate fittings.
    RSC galvanized steel conduit has the thickest-wall of the steel raceways. It is available with either an integral or straight-tapped coupling. Electroline’ s Hot Dip Galvanized Electrical Rigid Steel Conduit (UL6) has got excellent protection, strength, safety and ductility for electrical wiring.
    Electroline RSC conduit is manufactured from high-strength steel, and welded by electric resistance welding process.
    Electroline Rigid Steel Conduit (RSC) is zinc coated both inside and outside with hot dip galvanizing in such a way that ****l-to-****l contact and galvanic protection against corrosion are provided.
    The exterior surface of Electroline Rigid Steel Conduit (RSC) adopts a clear post-galvanizing coating to provide further protection against corrosion. The interior surface provides a smooth continuous raceway for easy wire pulling. The ductility characteristics of our conduits help for easy bending, cutting, and threading in the field.
    Electroline Rigid Conduit (RSC) is produced in normal trade sizes from 1/2“ to 6” in standard lengths of 10 feet (3.05 m). The rigid conduit is threaded on both ends, with a coupling applied to one end and a by size color coded thread protector to the other end as per table

معلومات الموضوع

الأعضاء الذين يشاهدون هذا الموضوع

الذين يشاهدون الموضوع الآن: 1 (0 من الأعضاء و 1 زائر)

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
 

 

 

Flag Counter